# Power Definitions and Formulas

## Power Definitions

<table border="1" id="bkmrk-breaker-those-little" style="border-collapse: collapse; width: 100%;"><colgroup><col style="width: 15.7739%;"></col><col style="width: 84.3453%;"></col></colgroup><tbody><tr><td>Breaker</td><td>Those little things in a breaker box that can get flipped if you’re looking to have a good time. In the USA, circuits are commonly 10, 15, or 20 amps. Things like washer / dryers are often on a 30A circuit, which could be represented by one or two breakers!</td></tr><tr><td>Circuit</td><td>A circuit is the name for the group of outlets that are tied to the same breaker. A circuit is most often a single breaker, but not always. You can have many outlets on the same circuit, but you can only consume what the breaker is rated to minus ~20%.   
</td></tr><tr><td>IEC</td><td>This is the cable that powers a device. This is not a PSU, but it is often the cable that plugs into the PSU. There are many types of IECs out there, but the most common are a two prong that look like they belong to a 90s boom box, and three prong that you see everywhere like computers, monitors, etc.   
</td></tr><tr><td>In-Rush Power</td><td>Most devices pull more power than what their normal draw is during their power up. This is called In-Rush. You might be drawing way less power during regular operation. To solve any gremlins caused by this, you just need to chase the power-on order of your devices so that their offset by a few seconds. This limits simultaneous rush power and you’ll be good!   
</td></tr></tbody></table>

## Power Formulas

Watts = Amps x Volts  
Amps = Watts / Volts  
Volts = Watts / Amps